Set of weights of 1000 g. made of steel A3 class M2 is usually used with mechanical balances and is supplied in a solid case that protects the integrity of the weights and ensures a long life.
Contains: 1 x 500 g weight, 1 x 200 g weight, 2 x 100 g weight, 1 x 50 g weight, 2 x 20 g weights and 1 x 10 g weight
Spherical flask with long neck and round base in borosilicate glass 3.3, capacity of 3,000 ml or 3 litres.
The neck of the flask is long and narrow; the mouth ends in a thick rim and is not ground in.
It is manufactured in accordance with DIN ISO 1773 from borosilicate glass 3.3, type 1, class A with high heat resistance.
The product is not screen-printed with the factory logo.
| Product to be discontinued, with no continuity and no right to exchange or return 3 last units |
140 mm long glass mallet to mortar
Made of soda lime glass in Spain, European Union (EU) - CE
The total length is 180 mm and the diameter of the ball is 38 mm approx.
As this is a handmade product, dimensions are approximate and may vary slightly.
The hammer is an accessory for our 150 mm diameter mortar.
Glass mortar pestle, 80 mm in length
This accessory is made of soda-lime glass in Spain, European Union.
This product is handcrafted, so the dimensions are approximate and may vary.
It measures 77 mm in length and has an approximate ball diameter of 24 mm approx.
Designed for efficient use, it is the perfect complement to our 80 mm glass mortars.
Foaming Trigger Spray and PP28 screw-in and a total length of 275 mm.
The head is specially designed to spray a creamy foam onto surfaces.
The tube or stem is removable, and its length can be adapted to suit different bottle heights.
It is necessary to cut the tube to suit the capacity of the container.
Available in white.
This closure model is available with glass bottles.
500 ml plastic bottle with narrow neck and 28 mm white screw cap.
This model has tapered shoulders and is supplied empty. The PP28 screw cap incorporates a sealing ring on the inside, ensuring a leak-free, hermetic seal.
Due to the specific characteristics of the neck design, the cap's safety ring remains attached after opening. Although it has a safety system, it is not functional: no tamper-evident seal.
Product suitable for food use.
Laboratory tools and equipment:
— Laboratory drainer
— Pencils for writing on glass, which are used to mark and write on slides and other glass instruments.
— For processes that require working with heat, a lighter or burner, an alcohol lamp and wire cloths with ceramic insulation are essential.
— Parafilm paper.
This classic glass alcohol burner is a basic instrument used in laboratories for heating and combustion processes.
The glass laboratory alcohol lamp is cheap and easy to use.
It has a plastic lid, so care must be taken when placing the lid and extinguishing the flame.
Furthermore, it is also used to heat chemicals and materials, and is particularly useful for experiments that require a controlled flame.
Cotton wick for alcohol lamps, sold by the meter.
Available in two thicknesses, 4 mm thin and 8 mm thick.
The thinner model is the one that fits our laboratory alcohol lamp.
The reference is price per meter.
| Product not subject to possible return. |
Steel ring with red PVC plastic coating and 48 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.
High thermal resistance and good chemical resistance.
Suitable for our 50 ml and 100 ml narrow neck Erlenmeyer flasks.
Steel ring with red PVC plastic coating and 56 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.
High thermal resistance and good chemical resistance.
Suitable for our 250 and 500 ml narrow neck Erlenmeyer flasks.
Steel ring with red PVC plastic coating and 61 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.
High thermal resistance and good chemical resistance.
Suitable for our 250 ml and 500 ml narrow neck Erlenmeyer flasks.
Steel ring with red PVC plastic coating and 74 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.
High thermal resistance and good chemical resistance.
Suitable for our 3000 ml and 5000 ml narrow neck Erlenmeyer flasks.
White plasticized steel laboratory drainer. Has a soft plastic end-caps to protect containers, containers and instruments that are placed to dry from scratches and impacts.
Capacity of 55 places
Can be used hanging on the wall or on a table-top
Includes bottom tray for water collection
Dimensions 670x360x150 mm
Laboratory burner for natural gas with gas and air flow regulation valves.
The increase or decrease of air/gas allows to adjust the intensity of the flame depending on the work process to be carried out: gradual and progressive heating or having a strong flame that allows a fast increase of the temperature.
Height 160 mm
Steel support grid 120×120 mm with ceramic fibre center.
Support for heating processes with laboratory glass with lighters or burners.
The ceramic centre protects against breakage by direct flame by distributing the heat evenly over the entire base surface of the container.
Without asbestos.
Steel support grid 150x150 mm with ceramic fiber center.
Support for heating processes with laboratory glass with lighters or burners.
The ceramic centre protects against breakage by direct flame by distributing the heat evenly over the entire base surface of the container.
Without asbestos
Steel support grid 200×200 mm with ceramic fiber center.
Support for heating processes with laboratory glass with lighters or burners.
The ceramic centre protects against breakage by direct flame by distributing the heat evenly over the entire base surface of the container.
Without asbestos.
Parafilm® M paper roll, 100 mm wide and 38 metres long. It is a 127 micron thick translucent polyolefin/wax film, malleable and stretchable to three or four times its total length.
A versatile laboratory closure to protect the integrity of laboratory and research applications.
It is ideal for laboratory work as it is a self-sealing thermoplastic film which allows it to conform to surfaces such as culture tubes, Erlenmeyer flasks, vials, Petri dishes and all types of containers with an adequate seal to protect against moisture loss, spillage, contamination or evaporation. The flexible material allows it to adhere around any irregular shape and surface.
Can be sterilized by radiation techniques such as hydrogen peroxide.
Good resistance to acid gases and alkaline solutions, as well as methanol and common reagents.
Resistant to working temperatures from -45 °C to 50 °C.
Metal glass marking pen with zinc tip
The pen is used for permanent marking or marking on glass or glass laboratory workpieces. The engraving is resistant to moisture, heat, cold and solvents.
The handle is made of gold-plated metal and has a small red silicone capsule to protect the stylus.
The total length is 146 mm
Diamond-tipped wooden marking pencil for glass
The diamond-tipped pen is used for permanent writing, marking or marking on glass.
Engraving is resistant to moisture, heat, cold and solvents
High-quality and beautiful tool made in Germany
Wooden handle
Length 15 cm
Black fine tip permanent marker for laboratory use
Indelible ink pen specially designed for writing on various surfaces such as glass, plastic and paper, ideal for labelling slides, Petri dishes, watch glasses or compact discs.
Its black ink provides high contrast and its fine tip ensures precise and delicate strokes, allowing writing on most surfaces without pre-treatment of the surface.
Labelling complies with GLP guidelines.
Plastic felt-tip pen with cap and 140 cm length.
More information in the description and datasheet.
Roll of 50 metres of tape for sterilisation processes, 19 mm wide and 5 metres long.
The reactive paper tape has white/yellow stripes, which are light lines that darken or change to black if the process has been completed correctly according to duration and temperature.
Fifty metre roll of self-adhesive tape that changes colour when it has been used in sterilisation processes.
It must be protected from humidity.
