New
14/23 Distillation Adapter Kjeldahl

14/23 Distillation Adapter Kjeldahl

1741423-K

Distillation adapter with trap ball to prevent carry-over of reactions which have a tendency to foam or splashes during boiling processes, distillation among others.

Complementary laboratory piece or accessory for assemblies in laboratory equipment.
Manufactured in borosilicate glass with ground-glass male and female standards ST 14/23.

13,10 €

(13,10 € tax excl.)

ColourClear
Made ofBorosilicate Glass 3.3
Glass colourClear glass
Ground-Glass Joint SJ14/23
Length - Long210 mm
Ball Diameter65 mm Ø

Kjeldahl Ball with Ground Glasses Joint JS 14/23

Prefabricated glass parts with ground joints facilitate connection and assembly in laboratory equipment. Ground glass joints have standard dimensions and are identified by NS or JS.

A glass piece or glass tube is supplemented with threaded inlets, thermometer adapters or hose connectors for venting or introducing vacuum into a system.

The frosted glass joints fit together with airtight connections and the use of clips is recommended to maintain this joint. See accessories for the appropriate clips for the size of the joint.

This Kjeldahl Adapter is placed between the flask and the condenser to avoid the dragging of reactions that tend to form foams or bubbles.

Top standard taper outer and lower inner joints, both being the same size: JS 14/23.

The total length is 210 mm and the ball is approximately 65 mm in diameter.

Clip de plástico para juntas esmeriladas NS 14/23 Color amarilloAbrazadera fabricada en polioximetileno (POM): El POM se caracteriza por su alta resistencia al impacto, rigidez y dureza hasta los -40°C

0,65 €

Clip de plástico para juntas esmeriladas NS 19/26 Color azulAbrazadera fabricada en polioximetileno (POM): El POM se caracteriza por su alta resistencia al impacto, rigidez y dureza hasta los -40°C

0,70 €

Clip de plástico para juntas esmeriladas NS 24/29 Color verdeAbrazadera fabricada en polioximetileno (POM): El POM se caracteriza por su alta resistencia al impacto, rigidez y dureza hasta los -40°C

0,95 €

Clip de plástico para juntas esmeriladas NS 29/32 Color rojoAbrazadera fabricada en polioximetileno (POM): El POM se caracteriza por su alta resistencia al impacto, rigidez y dureza hasta los -40°C

1,05 €

Other Products

Other Products

Angled Tube 75° with 29/32 Ground Glass Joint and Threaded Top Connection for Plain Stem Thermometers Complementary laboratory piece or accessory for assemblies in laboratory equipment. Manufactured in borosilicate glass with two 29/32 ground glass joint and threaded outlet. The lid with hole is to place a rod thermometer.

33,40 €