White aerosol spray screw cap for DIN18 screw bottles or Glass Dropper Bottles.The atomizer spray includes a clear plastic overcap to protect from accidental pushes.
The length of the spray cover is 150 mm. The length of the dip tube is 100 mm mounted inside the guide of the lid to be cut to adapt the length to the height of the bottle.
The closures, covers, caps, stoppers and plugs in our shop are only guaranteed to be watertight with our containers, vials, bottles and jars. |
18mm White Finger Spray Atomiser, Stepped
071.003-BF
White aerosol spray screw cap for DIN18 screw bottles or Glass Dropper Bottles.The atomizer spray includes a clear plastic overcap to protect from accidental pushes.
The length of the spray cover is 150 mm. The length of the dip tube is 100 mm mounted inside the guide of the lid to be cut to adapt the length to the height of the bottle.
The closures, covers, caps, stoppers and plugs in our shop are only guaranteed to be watertight with our containers, vials, bottles and jars. |
€0.48
€0.48 Tax incl.
€0.40 Tax excl.
Spain 21% VAT; The final tax applicable may vary according to the country of destination.
18 mm White Spray Atomizer, Skirt, with Protective Cap
DIN18 (18 mm) screw cap made of polypropylene, PP, with inner disc made of expanded polyethylene, EPE.
The disc facilitates the adjustment between the cap and the neck of the bottle, so that there is no leakage of the contents.
It is accompanied by a transparent safety cap to prevent any spillage or accidental use of the product during transport.
The length of the cane is long, allowing it to be used with containers of different capacities and sizes. It must be cut to fit the size of the container.
The dispensing rate per pulse is 0.12 ml of distilled water. Not recommended for very dense mixtures.
Ideal for evenly spraying the contents of your products.
This is a quality, reusable cap.
071.003-BF
Data sheet
- Product Type
- Spray Pump
- Accessory
- Glass Bottle & Spray Pump
- Material
- Polypropylene Plastic PP
- Packaging & Containers
- Plastic
- Colour
- White
- Neck Finish Recipient
- Screw 18 mm / DIN18
- Closure
- Spray cap
- Tamper-Evident Seal
- without Tamper-Evident Seal
- Inner Shape of the Cover / Inner Disc
- Closing Joint
- Closure Profile
- Ribbed with Skirt
- Length - Long
- 150 mm
- Immersion Tube Length
- 100 mm
- Sale
- by Unit
Related Products
