Flask Accessories

Accessories and complements for laboratory flasks

There are 24 products.

Showing 1-16 of 24 item(s)

100mm Cork Support for 250ml Flask

Compressed natural cork support with good resistance to certain temperatures.
A cork ring with bevelled inner part is suitable to hold securely and keep stable a round bottom container or round flask.

The diameter is 100 mm is suitable for our 250 ml flasks.

Price €4.19
€3.46 Tax excl.

120mm Cork Support for 500 & 1000ml Flask

Compressed natural cork support with good resistance to certain temperatures.
Cork ring with bevelled inner part is suitable to hold securely and keep stable a round bottom container or round flask.

The diameter is 120 mm is suitable for our 500 and 1000 ml flasks.

Price €5.52
€4.56 Tax excl.

140mm Cork Support for 2000ml Flask

140 mm diameter compressed natural cork holder to fit our 2000 ml flasks.
Material with good resistance to certain temperatures.
A cork ring with bevelled inner side is suitable for securely holding and keeping stable a round bottom vessel or spherical flask.

Price €7.62
€6.30 Tax excl.

48mm PVC Covered Steel Flask Ring

Steel ring with red PVC plastic coating and 48 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.
High thermal resistance and good chemical resistance.
Suitable for our 50 ml and 100 ml narrow neck Erlenmeyer flasks.

Price €8.02
€6.63 Tax excl.

56mm PVC Covered Steel Flask Ring

Steel ring with red PVC plastic coating and 56 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.


High thermal resistance and good chemical resistance.

Suitable for our 250 and 500 ml narrow neck Erlenmeyer flasks.

Price €11.60
€9.59 Tax excl.

61mm PVC Covered Steel Flask Ring

Steel ring with red PVC plastic coating and 61 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.
High thermal resistance and good chemical resistance.
Suitable for our 250 ml and 500 ml narrow neck Erlenmeyer flasks.

Price €15.43
€12.75 Tax excl.

74mm PVC Covered Steel Flask Ring

Steel ring with red PVC plastic coating and 74 mm inside diameter to give stability to the containers in the water in the thermostatic baths and in bain-marie.


High thermal resistance and good chemical resistance.

Suitable for our 3000 ml and 5000 ml narrow neck Erlenmeyer flasks.

Price €19.75
€16.32 Tax excl.

80mm Cork Support for 50 & 100ml Flask

Compressed natural cork support of 80 mm diameter is suitable for our 50 and 100 ml flasks. It's good resistance to certain temperatures.
A cork ring with bevelled inner part is suitable to hold securely and keep stable a round bottom container or round flask.


Price €3.99
€3.30 Tax excl.

Ground-Glass Stopper Standard Joint 14/23

Hollow glass stopper, hexagonal top and male standard ground joint, 14/23.
The dimensions of the standard joint (SJ) indicate the upper diameter and length of the joint in millimetres.
Made of borosilicate glass.
CE.

Price €2.55
€2.11 Tax excl.

Ground-Glass Stopper Standard Joint 29/32

Hollow glass stopper, hexagonal top and male standard ground joint, 29/32.
The dimensions of the standard joint (SJ) indicate the upper diameter and length of the joint in millimetres.
Made of borosilicate glass.
CE.

Price €7.02
€5.80 Tax excl.

Keck Clip for Joints 14/23

Plastic clamp for reinforcing the ground joints of two pieces of laboratory glassware with standard and normalized conical joints 14/23 (SJ)

Yellow colour
Clamp made of polyoxyethylene (POM). This material is characterized by its high impact strength, rigidity and hardness down to -40 °C.

Price €0.97
€0.80 Tax excl.

Keck Clip for Joints 29/32

Plastic clamp for reinforcing the ground joints of two pieces of laboratory glassware with standard and normalized conical joints 29/32 (SJ)

Red colour
Clamp made of polyoxyethylene (POM). This material is characterized by its high impact strength, rigidity and hardness down to -40 °C.

Price €1.69
€1.40 Tax excl.

Polypropylene Support for Flasks up to 10 liters

Universal support made of white propylene plastic with good resistance to certain temperatures.
Adequate base to hold securely and keep stable a round-bottomed container or round flask.

The support has engraved in relief different diameters allowing them to adapt to different capacities of flasks, from 50 ml to 10000 ml or 10 liters.

Price €5.87
€4.85 Tax excl.

PTFE Adapter for Stirring Rod for Reactor Flask

The PTFE agitator bearing adapter is a standard joint teflon stopper with a central hole of 8 mm.
In the centre of the part there is an 8 mm hole for the stirring rod.
The shape is conical or toric for a perfect fit with ground glass neck. There are different sizes to be selected at the time of purchase.
For more information, see the product description.
IMPORTANT: CHOOSE THE SIZE OF THE JOINT BEFORE ADDING THE PRODUCT TO THE BASKET

Price €6.50
€5.37 Tax excl.

PTFE Stirring Rod for Reactor Flask

A stirring rod with two folding vanes for reactor flasks, which is attached to the central opening of the reactor by means of a suitable adapter.
It can also be adapted to rod stirrers.
Available in rod and propeller lengths in different sizes to be selected at the time of purchase.
For more information, see the product description.
IMPORTANT: CHOOSE THE SIZE OF THE ROD BEFORE ADDING THE PRODUCT TO THE BASKET.

Price €8.63
€7.13 Tax excl.