Porcelain staining plate, 12 cavities

Code
In Stock Products

Porcelain enamelled plate except for the base with 12 cavities for staining.
The cavity diameter is 20 mm and depth approx. 5 mm.
High chemical and thermal resistance
Ideal for small chemical reactions.
Easy to clean.
Plate dimensions (length x width x height): 115x90x12 mm.

€11.50 tax incl.
€9.50 Tax excl.
Spain 21% VAT; The final tax applicable may vary according to the country of destination.
In Stock Products

Porcelain staining porcelain plate, 12 cavities

Rectangular porcelain slab with cavities.
Made of white enamelled laboratory porcelain: The surface and sides of the plate are enamelled for easy cleaning. The base of the slab is unglazed.
Plate dimensions:

    Length 110 mm
    Width 90 mm
    Height 12 mm

The wells are approximately Ø 20 mm in diameter and 5 mm deep.

Porcelain is highly resistant to acids and bases and resistant to thermal shock.

Ideal for small chemical reactions, suitable for actions involving colour changes and even for staining of small specimens.

It is used in laboratories, pharmaceutical, sanitary and dental centres.

Physical and chemical properties of laboratory porcelain

The composition of clay, quartz and feldspar ensures a high softening temperature, which allows working with unglazed articles up to 1350 °C and glazed articles up to 1100 °C.

Alkali resistance 99.96%.
Acid resistance 99.99%.
Hardness according to Mohs 7-8
Tensile strength 400 Kp/cm² Tensile strength 400 Kp/cm² Tensile strength 400 Kp/cm² Compressive strength
Compressive strength 3500 Kp/cm²
Minimum bending strength 500 Kp/cm²
Water absorption capacity 0%
Specific gravity 2,3-2,5 g/cm³

Data sheet

Product Type
Porcelain Spot Plate
Material
Porcelain
Diameter
17 mm Ø
Width
91 mm
Length - Long
115 mm
Enamelled / vitrified / glazed
Glazed inside and outside, except the base of the mortar