100ml Porcelain Evaporating Dish, 90mm, Round Bottom
Price €4.61 €3.81 Tax excl.
Porcelain flat-bottomed evaporating dish with a diameter of 110 mm.
Manufactured in the Czech Republic by JIPO.
Material properties:
- High mechanical strength
- Low longitudinal thermal expansion
- Maximum working temperature: with unglazed articles up to 1350 °C and with glazed articles up to 1100 °C.
Please see technical data sheet for dimensions and more information.
The laboratory porcelain is highly resistant to fire and direct flame. The evaporating dish is used for the separation of solutions by evaporation through the application of heat and, at higher temperatures, it is a support for carbonising or melting chemical substances and compounds.
The recipient has a pouring spout and is fully enamelled except for the lower outer base.
Utensil for jewellery and silverware professionals, metallurgical and ceramics companies, pharmacies, catering, kitchens and laboratories in general.
JIPO is a distinguished Czech brand recognised for the high quality of its products in accordance with EN 1183 and ISO 1775 standards.
The manufactured porcelain material is within the group C110 according to the Czech State Standard (CSN 60672-3 standard) and meets the parameters of the highest working requirements due to its high quality, good chemistry and heat resistance. Its composition is clay, quartz and feldspar (3AL2O3. 2SiO2).
Technical properties
High softening temperature, which makes it possible to work with:
unglazed products can be used at temperatures up to 1350 °C / 2462 °F
glazed products at temperatures of up to 1000 °C / 1832 °F
Other technical properties:
Density = 2.4 g/cm³
Resistance of unglazed products (70 MPa) bending strength
Thermal conductivity (Wm-1 . K-1) = 1.3
Resistance to alkalis, 99.96%.
Resistance to acids, 99.99%.
Hardness according to Mohs 7-8
Resistance to traction, 400 Kp/cm²
Resistance to compression 3500 Kp/cm²
Resistance to bending minimum 500 Kp/cm²
Water absorption capacity 0%